Nand firmware without soldering Antminer L3 +, D3, A3
๐ Firmware
๐ค MasterDump
Product Description
Needed: NEEDLE, SD-card 16-2 GB.
If the L3 + board does not fully start, all 4 blue LEDs do not light up (of course, if the internal nand stick is not dead at all).
If the board does not boot or sew with a factory restore L3 + SD-card from Bitmain. We read the exact instructions after the purchase.
In case of failure, no claims will be accepted, go for it at your own peril and risk.
If the L3 + board does not fully start, all 4 blue LEDs do not light up (of course, if the internal nand stick is not dead at all).
If the board does not boot or sew with a factory restore L3 + SD-card from Bitmain. We read the exact instructions after the purchase.
In case of failure, no claims will be accepted, go for it at your own peril and risk.
Related Products
CPE_903 - Web interface, Russian
Seller: softprogs
Firmware Samson Meteor Mic Condenser Microphone
Seller: Zasnimator
Chipless firmware for WF7710, WF7711, WF7720, WF7721
Seller: Resetters.com
Firmware Key for Epson printers
Seller: Resetters.com
Epson Counter Reset : L500_L510_L520_L540_L550
Seller: JKShop
Full dump V1.0_171130 for Avalon 841 control board
Seller: MasterDump
MAZDA 3 2.0AT 150ะะก SW-LF8TEB000 TUN+E2
Seller: Chipmaster
Mazda 3 1.6 AT Z634EC0WZ01 Z634EC000 Stage1 E2
Seller: Chipmaster