Full dump chip MT29F2G08ABAEA for Bitmain Antminer L3+ - for re-programming the soldered flash chip through the programmer (or ChipProg48 or analog)
If the internal flash chip does not die and the board does not boot from the SDcard.

Dump is reading from the working chip (reading was from two working flashes with different errors, apparently caused by the programmer, did not work immediately) and corrected for errors.

If you do not have a programmer and a socket for flash memory, then do not buy this dump. This is not a firmware!
In case of failure, no claims are accepted, dare at your own peril and risk.